Warehouse & Industrial Wi-Fi
Fix scanners dropping Wi-Fi in the aisles, on site
Our handheld scanners keep disconnecting as staff move down the aisles.
Our handheld scanners keep disconnecting as staff move down the aisles.
Scanners that drop out in the aisles are often not short of signal. They hang on to a distant access point instead of moving to a closer one, then lose it when steel racking gets in the way. High transmit power, overlapping channels and settings that do not suit the scanner's Wi-Fi chip all make it worse. Firmware on the scanners themselves can also hold back roaming.
What the technician does
- Walk-test the floor with your scanners and log where they drop
- Adjust access point power, channels and roaming settings
- Retest along every aisle and record the final settings
Note which aisles and which times of day the drops happen - full racking behaves differently from empty racking.
About fix scanners dropping Wi-Fi in the aisles
We test with the actual scanners your team uses, not a laptop, and record signal and roaming along each aisle. Fixes usually involve lowering power so devices roam earlier, cleaning up channel overlap, setting minimum data rates and matching security settings to what the scanner supports. Where coverage is genuinely missing, we mark a new access point position. Settings are recorded so they survive a controller reset or an access point replacement.
What usually causes it
- Access points running at full power so scanners do not roam
- Steel racking and full pallets blocking signal
- Channel overlap between neighbouring access points
- Older scanners that do not support newer roaming features
Before we arrive
- A floor plan or racking layout, even a hand-drawn one
- One or two of the scanners or terminals your staff use
- Access to scissor lifts or confirmation of ceiling heights
- The name of your stock or warehouse system provider
What a visit looks like
When you book fix scanners dropping Wi-Fi in the aisles, you tell us what's going on and we reply with a time that suits you and a price. Nothing starts until you're happy with both.
On the day, the technician arrives, looks at the problem in person and confirms the plan with you before starting. If something turns out different from what was expected - a part is needed, or the cause is somewhere else - we stop and agree the change with you first.
When the work is done we test it with you, show you what was changed, and leave the area tidy. For business jobs we note what we did, so there is a record for whoever looks after your IT next.
Pricing
Each fix scanners dropping Wi-Fi in the aisles job is priced before work starts. The price depends on what's involved - the size of the site, the equipment, and whether parts are needed - so the quickest way to a number is to tell us about the job on the booking form.
There is no contract and no monthly fee. You book the job you need and pay for that job.
Fix scanners dropping Wi-Fi in the aisles: questions
Do we need new access points?
Not always. Many roaming problems are fixed by changing settings. If coverage is genuinely missing in part of the building, we suggest where an additional access point would help.
Can you test while the warehouse is working?
Yes, and testing during normal operation is useful because it shows real conditions. We work around forklifts and pickers and agree where we can walk safely.
Do you do fix scanners dropping Wi-Fi in the aisles on site?
Yes. We come to businesses and homes across Auckland and Hamilton and do the work where the equipment is.
How much does fix scanners dropping Wi-Fi in the aisles cost?
It depends on what's involved. Tell us about the job on the form and we'll confirm the price before any work starts.